XTR-12630
|
|
| Range | 50-63A |
| Contact configuration | 2 CO (DPDT) |
| Nominal coil power | AC 1.8 VA / DC 1.2W |
| Coil voltage range | (0.8 . . . 1.1)Un |
| Holding voltage AC/DC | 0.8/0.5 Un |
| Drop-out voltage AC/DC | 0.2/0.1 Un |
| Rated contact voltage | 250 V AC |
| Rated contact current | 10 A |
| Operating frequency | 50 Hz |
| Max. Switchin power AC1 | 2500 VA |
| Nominal coil voltage Un (V AC) | 12, 24, 48, 110, 230 |
| Nominal coil voltage Un (V DC) | 12, 24, 48, 110 |
| Operate/release time max. | 12/10 ms |
| Dielectric strength | 2000 V AC, between coil-contact |
| 1500 V AC, NO contact | |
| 2000 V AC, between pole-pole | |
| Insulation resistance | 10 M Ohm min. (at 500 V DC) |
| Contact resistance | 50 m Ohm max. (initial value) |
| Operating frequency (no load) | 300 operations/min |
| Operating frequency (full load) | 10 operations/min |
| Mechanical durability | 10.000.000 operations min. |
| Electrical durability | 100.000 operations min. |
| Degree of protection | IP40 |
| Ambient operating temperature | -10 . . . 55°C |
| Ambient operating humidity | 85%RH max. |
| Terminals | Socket pin |
| Contacts | Silver alloy (Ag/Ni) |
| Standarts | EN 61810-1 |
| Approval | CE |
| Storage temperature | -40 . . . 70°C |